This is the Fall 2017 Kick-Off Seminar, presenting an overview of LCSR, useful information, and an introduction to the faculty and labs.
Robots hold promise in assisting people in a variety of domains including healthcare services, household chores, collaborative manufacturing, and educational learning. In supporting these activities, robots need to engage with humans in cooperative interactions in which they work together toward a common goal in a socially intuitive manner. Such interactions require robots to coordinate actions, predict task intent, direct attention, and convey relevant information to human partners. In this talk, I will present how techniques in human-computer interaction, artificial intelligence, and robotics can be applied in a principled manner to create and study intuitive interactions between humans and robots. I will demonstrate social, cognitive, and task benefits of effective human-robot teams in various application contexts. I will discuss broader impacts of my research, as well as future directions of my research focusing on intuitive computing.
Chien-Ming Huang is an Assistant Professor of Computer Science in the Whiting School of Engineering at The Johns Hopkins University. His research seeks to enable intuitive interactions between humans and machines to augment human capabilities. Dr. Huang received his Ph.D. in Computer Science at the University of Wisconsin–Madison in 2015, his M.S. in Computer Science at the Georgia Institute of Technology in 2010, and his B.S. in Computer Science at National Chiao Tung University in Taiwan in 2006. His research has been awarded a Best Paper Runner-Up at Robotics: Science and Systems (RSS) 2013 and has received media coverage from MIT Technology Review, Tech Insider, and Science Nation.
The ability to manufacture micro-scale sensors and actuators has inspired the robotics community for over 30 years. There have been huge success stories; MEMS inertial sensors have enabled an entire market of low-cost, small UAVs. However, the promise of ant-scale robots has largely failed. Ants can move high speeds on surfaces from picnic tables to front lawns, but the few legged microrobots that have walked have done so at slow speeds (< 1 body length/sec) on smooth silicon wafers. In addition, the vision of large numbers of microfabricated sensors interacting directly with the environment has suffered in part due to the brittle materials used in microfabrication. This talk will present our progress in the design of sensors, mechanisms, and actuators that utilize new microfabrication processes to incorporate materials with widely varying moduli and functionality to achieve more robustness, dynamic range, and complexity in smaller packages. Results include skins of soft tactile or strain sensors with high dynamic range, new models of bio-inspired jumping mechanisms, and magnetically actuated legged microrobots from 1 gram down to 1 milligram that provide insights into simple design and control for high speed locomotion in small-scale mobile robots.
Sarah Bergbreiter joined the University of Maryland, College Park in 2008 and is currently an Associate Professor of Mechanical Engineering, with a joint appointment in the Institute for Systems Research. She received her B.S.E. degree in Electrical Engineering from Princeton University in 1999, and the M.S. and Ph.D. degrees from the University of California, Berkeley in 2004 and 2007 with a focus on microrobotics. Her research uses inspiration from microsystems and biology to improve robotics performance at all scales. She has been awarded several honors including the DARPA Young Faculty Award in 2008, the NSF CAREER Award in 2011, and the Presidential Early Career Award for Scientists and Engineers (PECASE) in 2013 for her research on engineering robotic systems down to sub-millimeter size scales. She also received the Best Conference Paper Award at IEEE ICRA 2010 on her work incorporating new materials into microrobotics and the NTF Award at IEEE IROS 2011 for early demonstrations of jumping microrobots. She currently serves on DARPA’s Microsystems Exploratory Council and as an associate editor for IEEE Transactions on Robotics and ASME Journal on Mechanisms and Robotics.
Incredible biological mechanisms have emerged through evolution, and can provide a wellspring of inspiration for engineers. One promising area of biological inspiration is the design of devices and robots made of compliant materials, as part of a larger field of research in soft robotics. In this talk, the research topics of soft robotics currently underway in the mLab at Oregon State University will be presented. Soft active materials designed and researched in the mLab include liquid metal, biodegradable elastomers, and electroactive materials. Bioinspired mechanisms include octopus-inspired soft muscles, gecko-inspired adhesives, and soft wearable sensors. However, the biological mechanisms that serve as a source of inspirations are made of materials that are vastly more compliant than the metal and plastic that engineers and roboticists normally use. To imitate and improve on nature’s design, we must create mechanisms with materials like fabric and rubber which is difficult to integrate into traditional fabrication techniques. To address these limitation, the mLab is also innovating in multi-material 3D printing to rapidly and directly fabricate soft robots. Though significant challenges remain to be solved, the development of such soft materials and devices promises to bring robots more and more into our daily lives.
Dr. Yiğit Mengüç works at the interface of mechanical science and robotics, creating soft devices inspired by nature and applied to robotics. He received his B.S., 2006, at Rice University his M.S., 2008, and Ph.D., 2011, in Mechanical Engineering at Carnegie Mellon University. He completed his postdoctoral work at Harvard University’s Wyss Institute for Biologically Inspired Engineering in 2014 and is now an assistant professor of Robotics and Mechanical Engineering at Oregon State University where he founded and leads the mLab. He received an Office of Naval Research Young Investigator Program (ONR YIP) Award in 2016 to develop cephalopod-inspired robots.
SimpleITK is a simplified, open source, multi-language interface to the National Library of Medicine’s Insight Segmentation and Registration Toolkit (ITK), a C++ open source image analysis toolkit which is widely used in academia and industry. SimpleITK is available in multiple programing languages including: Python, R, Java, C#, C++, Lua, Ruby, and TCL. Binary versions of the toolkit are available for the GNU Linux, Apple OS X, and Microsoft Windows operating systems. For researchers, the toolkit facilitates rapid prototyping and evaluation of image-analysis workflows with minimal effort using their programming language of choice. For educators and students, the toolkit’s concise interface and support of scripting languages facilitates experimentation with well-known algorithms, allowing them to focus on algorithmic understanding rather than low level programming skills.
The toolkit development process follows best software engineering practices including code reviews and continuous integration testing, with results displayed online allowing everyone to gauge the status of the current code and any code that is under consideration for incorporation into the toolkit. User support is available through a dedicated mailing list, the project’s Wiki, and on GitHub. The source code is freely available on GitHub under an Apache-2.0 license (github.com/SimpleITK/SimpleITK). In addition, we provide a development environment which supports collaborative research and educational activities in the Python and R programming languages using the Jupyter notebook web application. It too is freely available on GitHub under an Apache-2.0 license (github.com/InsightSoftwareConsortium/SimpleITK-Notebooks).
The first part of the presentation will describe the motivation underlying the development of SimpleITK, its development process and its current state. The second part of the presentation will be a live demonstration illustrating the capabilities of SimpleITK as a tool for reproducible research.
Dr. Ziv Yaniv is a senior computer scientist with the Office of High Performance Computing and Communications, at the National Library of Medicine, and at TAJ Technologies Inc. He obtained his Ph.D. in computer science from The Hebrew University of Jerusalem, Jerusalem Israel. Previously he was an assistant professor in the department of radiology, Georgetown university, and a principal investigator at Children’s National Hospital in Washington DC. He was chair of SPIE Medical Imaging: Image-Guided Procedures, Robotic Interventions, and Modeling (2013-2016) and program chair for the Information Processing in Computer Assisted Interventions (IPCAI) 2016 conference.
He believes in the curative power of open research, and has been actively involved in development of several free open source toolkits, including the Image-Guided Surgery Toolkit (IGSTK), the Insight Registration and Segmentation toolkit (ITK) and SimpleITK.
This talk will show that attitude Kalman filters can be simple in design while also being robust and accurate despite the highly nonlinear nature of attitude (i. e., orientation) estimation. Three different filters are discussed, all using quaternions and small-angle approximations of attitude errors: an Extended Kalman filter as well as an Unscented Kalman filter for a gyro-based situation, and an Extended Kalman filter for a gyro-less one. In additon to the three-axis attitude, all of the filters also estimate corrections to the angular velocity – random walk modeled biases in the gyro measured case, and first-order Markov modeled corrections in the gyro-less case, which involves angular velocity computed from mass properties and control data.
The filters are evaluated using extensive real and simulated data from low-Earth orbiting NASA satellites such as Tropical Rainfall Measurement Mission, Solar, Anomalous, and Magnetospheric Particle Explorer, Earth Radiation Budget Satellite, Wide Field Infrared Explorer, and Fast Auroral Snapshot Explorer. The evaluations predominantly involve stressing “magnetometer-only” scenarios, i. e., using only a three-axis magnetometer to sense the attitude. Comparisons are made with attitude and rate knowledge obtained using coarse sensors and single-frame algorithms, and also with results from an Unscented Kalman filter with a more complicated attitude pameterization.
Dr. Murty Challa received a B.Sc. in physics from Andhra University, Visakhapatnam, India, and a Ph.D. in physics from the University of Georgia, Athens, Georgia. His professional interests and actvities include: estimation and data fusion algorithms such as Kalman filters, batch estimators, and simultaneous localization and mapping; track correlation/ association; guidance, navigation, and control for spacecraft and unmanned vehicles; missile defense; quantum computing; statistical mechanics; computational physics; solid state physics/ materials science. He is currently a member of the Senior Professional Staff of Johns Hopkins Applied Physics Laboratory (JHU/APL), Maryland, USA. Prior to JHU/APL, he was senior staff at Institute for Defense Analyses, Alexandria, VA, and at Computer Sciences Corporation supporting NASA Goddard Space Flight Center, Greenbelt, MD. Dr. Challa’s academic positions include post-doctoral appointments in physics at Michigan State University and Virginia Commonwealth University, and an adjunct position in physics at George Washington University. He has also served as a consultant to Iridium Satellite, LLC.
This talk and demonstration will give an overview of the open-source Robot Operating System (ROS) software ecosystem for robot systems development. ROS is a modular open-source software system whose core is a publish-subscribe middleware system for C++ and Python under Linux that supports message passing, recording and playback of messages, distributed parameters, and extensive introspection tools. Other open source publish subscribe systems well known to robotics developers include Lightweight Communications and Marshalling (LCM) and the Mission Orientated Operating Suite (MOOS). In addition to message passing, the ROS ecosystem offers an extensive set of tools and software packages that employ standard message definitions for robotics, a robot geometry library and description language, device interface libraries for numerous COTS devices, localization and navigation packages, three-dimensional visualization with Rviz, and physics-based robot simulation with Gazebo. ROS is now the most widely used software system for robotics research. Also see: http://www.ros.org
If you are unfamiliar with ROS you are encouraged to bring their notebook computers to this seminar so that you can browse in real-time to web pages mentioned in this talk.
Louis L. Whitcomb is a Professor in the Department of Mechanical Engineering, with secondary appointment in Computer Science, at the Johns Hopkins University’s Whiting School of Engineering. His research focuses on the navigation, dynamics, and control of robot systems – with applications to robotics in extreme environments including space and underwater robots. He is former (founding) Director of the JHU Laboratory for Computational Sensing and Robotics. He received teaching awards at Johns Hopkins in 2001, 2002, 2004, and 2011, was awarded the NSF Career Award and the ONR Young Investigator Award. He is a Fellow of the IEEE.
Autonomy in robotic surgeries has advantages of improved surgical efficiency, decreased surgeon fatigue, and potentially leads to improved surgical outcomes. This talk presents our latest efforts towards surgical robotic autonomy on 1) Raven II surgical robot sensorless gripping force and state estimation, 2) motion planning based on Recurrent Neural Networks(RNNs), and 3) software design for preoperative planning in endoscopic sinus and skull base surgeries. In force estimation experiments, we compared a non-parametric estimator (Gaussian Process Regression) with a nonlinear filter (Unscented Kalman Filter) based method and found the results from former is more conservative than the latter. In motion planning, we demonstrated RNN control schemes can be easily adapt to various optimization targets and constraints, such as joint velocity regularization or soft obstacle avoidance. In preoperative planning, we demonstrated the design of an interactive preoperative surgical planning software, which helps us to better understand endoscopic surgeries.
Yangming Li is an acting instructor at BioRobotics Lab, University of Washington. Prior to this position, he was an associate professor at Institute of Intelligent Machines, Chinese Academy of Sciences, where he received Young Researcher Award (2011) from National Science Foundation of China. He also worked as Postdoc at University of Michigan. He received a PhD from a joint program by University of Science and Technology of China and University of Michigan in 2010. His early research interest was Simultaneous Localization and Mapping, and now he is interested in improving surgical outcomes with robotic surgeries.
Thin, flexible robots able to bend and elongate can help surgeons reach deeper and more accurately into the human body than ever before, through increasingly smaller incisions. This talk will cover recent breakthroughs in design, control, and sensing that are rapidly pushing the boundaries of surgical robotics to smaller scales, greater accuracy, and more effective interaction with surgeons. Mechanics-based models of elastic robots provide the basis for these advancements, which in turn provide the raw materials necessary for building effective surgical robotic systems. These systems can offer autonomous, teleoperated, or hand-held surgeon-robot interactions. The talk will cover both recent advancements in concentric tube robots, and also new ideas in reconfigurable parallel continuum robots that assemble inside the body. An important theme of the talk will be the fascinating process of partnering with surgeons to create robots suitable for real-world operating room environments that have the potential to be powerful weapons in the fight against lung disease, brain tumors, hemorrhagic stroke, epilepsy, deafness, and urologic disorders.
Robert J. Webster III received his B.S. in electrical engineering from Clemson University in 2002, and his M.S. and Ph.D. in mechanical engineering from the Johns Hopkins University in 2004 and 2007 where he worked in the CISST-ERC, which was the precursor to the LCSR. In 2008 he joined the mechanical engineering faculty of Vanderbilt University, where he currently directs the Medical Engineering and Discovery Laboratory. He founded and serves on the steering committee for the Vanderbilt Institute for Surgery and Engineering, which brings together physicians and engineers to solve challenging clinical problems. Prof. Webster’s research interests include surgical robotics, medical device design, image-guided surgery, and continuum robotics. He is a recipient of the IEEE Robotics and Automation Society Early Career Award, the National Science Foundation CAREER award, the Robotics Science and Systems Early Career Spotlight Award, IEEE Volz award, and the award for Excellence in Teaching from Vanderbilt University.